Working with rusEFI (Zgrywus K8)
Working in the car - dash connected to rusEFI
Power the device
Use the bottom USB-C port and the provided USB cable. Connect the other side of the USB cable to a regular car phone charger.
Connecting ApexDuck to rusEFI (Zgrywus K8)
Connect the ApexDuck CAN port to the rusEFI CAN pins. Use the provided cable. The black wire is CAN_L, the red wire is CAN_H.
rusEFI configuration
- Make sure the "Enable rusEFI CAN broadcast" option is set to true
- Make sure the "Bitrate" is configured the same way as in the "CAN" tab for ApexDuck (default is 500Kbps)
- Make sure the "rusEFI CAN data base address" is configured the same way as in the "CAN" tab for ApexDuck (default is 512 (0x200 in HEX))
- Make sure the "rusEFI data address type" is set to "11 bit"
Changing ApexDuck configuration
Enter config mode and open the configurator
- Connect the USB cable to your PC
- Scroll through the pages until you see "CONFIG MODE"
- Go to the configurator website https://configurator.apexduck.pl/ and follow the further instructions